GPC DJI Matrice 300 Case x 1
GPC DJI Matrice 300 Case
This small case packs 4 flights worth of batteries, 2 controllers, 2 controller batteries, 2 GPC LensPen MicroPro and 2 GPC Micro SD Card Holder.
Here you go! The Grand Poobah from DJI! The most intelligent UAV DJI has created to date. We have watched this vehicle come to life for quite some time now and we have tracked its challenging storage configuration, therefore designing unchallengeable protection in the smallest footprint. A small footprint doesn’t mean limited storage; this small case packs 4 flights worth of batteries, 2 controllers, 2 controller batteries, * 2 GPC LensPen MicroPro and * 2 GPC Micro SD Card Holder. We next took it to the next level with ridiculously simple customizable payload storage. The removable payload tray comes stock to fit the H20 or H20T, Z15 spotlight light, Z30 and FLIR XT2. If you don’t need the Z30 or XT2 or both, then we have designed it so you can just remove the perforated foam creating their cavities and you now have storage for either one of those or two individual accessory cavities or one large cavity. We have also packed 2 accessory cavities under the payload tray next to the lower batteries and adjacent to the spare props.
This doesn’t end the options! Knowing that your payloads are subject to change based on your missions from day to day or if you don’t have any of the stock payloads then customization of this specific tray is easy. There is plenty of room with 88 SQ IN to get creative.
1 DJI Matrice 300 (Batteries Attached)
2 Controllers (Batteries Attached and with option to keep DJI lanyard attached)
3 Spare Batteries Sets (1 set Under Payload Tray)
2 Controller Batteries
2 GPC LensPen MicroPro (Sold Separately)
2 GPC Micro SD Card Holder (Sold Separately)
2 Accessory Cavities Under Sensor Tray (1 either side of batteries)
H20T or H20
XT2 (removable for accessory storage)
Z30 (removable for accessory storage)
- Water-jet precision cut with closed cell foam to resist water and dust infiltration.
- Our custom foam is housed in a durable SKB military spec case used by military and industrial leaders.
- Made in the USA, Shipped Worldwide
- Industrial strength injection molded pull handle
- In-line skate style wheels for easy transport
- Padlock holes include stainless steel padlock protector clips
- Waterproof and dust tight design (MIL-C-4150J)
- Molded-in hinge for added protection
- Trigger release latch system
- Snap-down rubber over-molded cushion grip handle
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
- Resistant to impact damage (MIL-STD-810F)
- Lifetime replacement guarantee
- Remember! – If it doesn’t say GPC in the foam, it isn’t guaranteed!
Exterior Length 26.50 in
Exterior Width 26.54 in
Exterior Depth 15.65 in
Interior Length 24 in
Interior Width 24 in
Interior Depth 14 in
Weight 28 lb 0.00 oz
Shipping Weight 35 lb 0 oz
|Dimensions||28 × 27 × 17 in|